Equipment verification tests. Friction pendulum / slip resistance ACREDITED ENAC ILAC

• Checking the dimensions of the pendulum scale.

Pre-calibration verification.

• Detailed inspection.

• Checking the center of gravity of the swing arm and the mounting of the shoe.

• Checking the effective tension of the spring.

• Checking the force / displacement characteristics of the shoe.

• Checking the leveling of the equipment.

Our Procedure is carried out in accordance with the following rules:

UNE 41901: 2017 EX Apdo.4, Annex A and Annex B

CEN / TS 16165: 2016 Clause 2, Annex C.9 and C.10

BS 7976-1: 2002 + A1: 2013

BS 7976-2: 2002 + A1: 2013

BS 7976-3: 2002 + A1: 2013

UNE EN 13036-4: 2012 Section 6 and Annex A.3

UNE-EN 1097-8: 2000 Annex D

In our dossier we will be able to compare all the parameters that we carry out in our Procedure, where the report delivered to the client comes with the record of all the inspections, observations, required actions, equipment adjustments and results of the individual checks of all the points.

Our specialization in the slippery sector, with 17 ENAC accredited Pendulum system tests, gives us experience and knowledge that we want to share. We believe that our Equipment Verification Test Procedure. Friction / slip resistance pendulums “, is a guarantee for our customers, providing technical solvency to all the critical parameters that this test system may have.

We have a multitude of equipment, advanced technical means and highly qualified personnel to verify your equipment as if it were our own, so that when you leave our laboratory, your pendulum, with the fulfillment of all these sections, our procedure, guarantees a variation of ≤3 Rd on recognized surfaces.

(Visited 23 times, 1 visits today)

Leave A Comment

Your email address will not be published. Required fields are marked *